High Density Combine Foam / Butyl Sound Damping Material
|Alumnium Color :||Silver|
|Raw Material :||Butyl; Aluminum; Foam Rubber|
|Butyl rubber Color :||Black|
|Release Paper :||Yellow ; White ; Brown|
|Thickness :||4.5mm; 177mil(Accept customerization)|
|Size :||460 mm X 800 mm; 18”x31.5” ( Accept customerization)|
|Service Life :||8years|
|1.Door Kits||4 pcs / pack ; 5 packs / Carton|
|2. Bulk Kits||9 / 10 pcs / Pack ; 2 packs / Carton|
|3.Normal Packaging||20 pcs / Carton|
Structure: Foam rubber + foil + butyl rubber +releasing liner
Car noise mainly from engine, car body structure, road, wind and
ZZXY-05 High Density Combine Foam / Butyl Sound Damping Material is
an enhanced material based on the alu-buytyl material, it mainly
used for vibration damping, reducing car engine noise, wheel noise,
road noise, wind noise ,improve car audio sound quality,
• Easy-to-install, very high-strength adhesive butyl rubber
• Eliminate body/floor vibration
• Better audio sound quality
• Good to160℃
• Water proof, fire proof
Our products competitive
Improves Bass Quality and Reduces Bass Distortion
Kill unwanted noise, rattles, vibrations
Reduce exhaust and engine noise
Full car installation reduce noises 5-8 dB
Temperature range of -60 degree ~160 degree
It can be die cut to shape and placed onto the body surface
directly on painted panels or after the sheet metal is cleaned
before painting (typically at the sealer application operation). is
used to treat metal panels, partitions, ducts, doors, bins, panels,
and so forth in railroad cars, buses, automobiles, and ships. It is
also used for ventilation ducts, relay cabinets, steel furniture,
home appliances, sink units, computer equipment, machine tools and
many other objects that suffer from vibration-produced noise.
It is also used for building construction, electronic industry,
machinery, steel furniture, home appliances noise.
1.Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner.
2.Remove dust, grease, moisture, and other foreign matter from the
3.Peel off the release liner. The simplest application technique is
to bend the mat slightly and attach it along its shortest edge.
4.Press the mat firmly into place, using a roller for larger
pieces. The roller reduces the risk of leaving air pockets, which
reduce sound damping capacity.
1.The temperature of the mat and application surface should not be
below room temperature during fitting.
2.No need hot gun.
3.Working gloves should be used during installation