XPE Foam Auto Sound Insulation Material,Classic Car Restoration
|Raw Material :||XPE Foam with adhesion|
|Foam Color :||Grey; Black|
Release Paper :
|Yellow ; White ; Brown|
|Thickness :||5mm (200mil) (Accept customerization)|
|Size :||500mm X 800mm;19.6”x31.5” ( Accept customerization)|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
9 / 10 pcs / Pack ; 2 packs / Carton
|Normal||30 pcs / Carton|
GY-05 High - Tack Grey XPE Foam Sound Deadening Material
GY-05 is a Cross linked Polyethylene Foam (XPE) Sound deadening material sheet.
Faced side similar to the honeycomb in grey color,the other
adhesives side protected by the releasing liner.
It is lightweight, flexible and soft to touch, yet strong, tough,
resilient and resistant to moisture, many chemicals and high
Foam color shall be grey or black
With one side very high tack self-adhesive, the deadening sheet
installation will be an "easy-going" project for every customer.
It can eliminate or dampen the vehicle noise that come from engine,
body structure, wheel, wind and more.
1, Light weight,easy-to-install, very high-strength adhesive
2, Increases SPL
3, Eliminates or dampen vibration and noise
4, Improves Bass Quality and Reduces Bass Distortion
5, Reduce exhaust and engine noise
6, Full car installation reduces unwanted noises 5-8 dB
7, Temperature range of -20degree ~140 degree
8, Service life:7-8years
Can be die cut to shape and placed onto the body surface directly
on painted panels or after the sheet metal is cleaned before
painting (typically at the sealer application operation). is used
to treat metal panels, partitions, ducts, doors, bins, panels, and
so forth in railroad cars, buses, automobiles, and ships.
Also used for ventilation ducts, relay cabinets, steel furniture,
home appliances, sink units, computer equipment, machine tools and
many other objects that suffer from vibration-produced noise.
Others,used for building construction, electronic industry,
machinery, steel furniture, home appliances noise.
Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner. Next, remove dust, grease,
moisture, and other foreign matter from the application surface.
Peel off the release liner.
The simplest application technique is to bend the mat slightly and
attach it along its shortest edge. Press the mat firmly into place,
using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity.
The temperature of the mat and application surface should not be
below room temperature during fitting. Heating the material is not
Our products competitive
• Easy-to-install, very high-strength adhesive
• Eliminate body/floor vibration
• Better audio sound quality
• Water proof, fire proof material